Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Data acquisition and controle through gsm modem circuit diagram and all files

Status
Not open for further replies.
sribangaram

sribangaram

Full Member level 5
Joined
Apr 29, 2012
Messages
297
Helped
7
Reputation
14
Reaction score
7
Trophy points
1,298
Location
INDIA.:/;:'" VIJAYAWADA
Activity points
3,754
Dear Friends I need data acquisition and controller circuit through gsm and gprs modem
I have to search but i cont get the best circuit Please help me anybody :roll::thinker:
 

how many channels of data acquisition, how many bits converted by the ADC, how fast, etc?
what do you want to control, e.g. how many devices, how are they attached (I2c, SPI, CANBUS, etc)

to aid in selecting a target device you can use product selectors, e.g. Microchip
https://www.microchip.com/maps/microcontroller.aspx
 

Friend thank's to your reply I don't have a that much of knowledge
Actually I need gsm and gprs modem based data acquisition system

3 AC power(230v) reading
1 DC power(48v) reading
2 Temperature reading
10 out puts for relay controller and with sms allert Data will be recording in my IP please help me

- - - Updated - - -

Friend i have to found one but I cont get the surce file if possible please provide the surce file
LINK : **broken link removed**
 


PIC 18F4550 18F2550 USB IO board.jpgFriend Please see this link : https://www.circuitvalley.com/2011/09/pic-18f4550-usb-io-input-output-board.html
this is only usb but i want to add gprs modem i want to change surce file but i don't have a knowledge for surce changing this is enough to my project
 

Attachments

  • USBioboardSourcecodefile (1).rar
    488.9 KB · Views: 121
Last edited:

you can connect a GPRS modem to the UART (pins 25 and 26 of PIC18F4550) and send AT commands
if do a forum search on GPRS modem it will give you plenty of links to posts on the subject
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top