Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Incorrect Data reception in lpc2388 ethernet interface

Status
Not open for further replies.
B

bluelotus_001

Newbie level 2
Joined
May 29, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
14
hi all,

Can any one help me in pointing out the problem.
I am using Ethernet interface on MCB2300 Evaluation board using lpc2368 controller it is working fine(easyweb sample code). same code im using in LPC2388 I am able to receive data but incorrect data i am getting(for example im transmitting 0x61 0x61 0x61 0x61 0x61 0x61 0x61 0x61 im getting 0x21 in place of 0x61 in some bytes )what could be the reason??
i am not verifing checksum.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top