Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HDMI to CVBS converter using Chrontel CH7107A

Status
Not open for further replies.
N

nagendra_ps1

Newbie level 1
Joined
Jan 16, 2008
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
I am working on HDMI to CVBS converter using Chrontel CH7107A.

I have built a small board in line reference schematics provided by chrontel.(Same as ref design ,no variation)

**broken link removed**


During board bring up ,I am unable to the crystal clock and also no Audio and video output

The power levels are ok and the proper DC values are present at chip pins.

Could anyone help me to sort out this issue?
 

nagendra_ps1 said:
I am working on HDMI to CVBS converter using Chrontel CH7107A.

I have built a small board in line reference schematics provided by chrontel.(Same as ref design ,no variation)

**broken link removed**


During board bring up ,I am unable to the crystal clock and also no Audio and video output

The power levels are ok and the proper DC values are present at chip pins.

Could anyone help me to sort out this issue?
Click to expand...

Did you get this working?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top