Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SNDR problem about my 3rd order delta sigma modulator

Status
Not open for further replies.
S

Schmitt001

Newbie level 2
Joined
May 7, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
17
Hi,everyone!
I have built a 3rd order feedforward delta sigma modulator in spectre, the fully differential opamp, comparator, d_ff are all implemented by veriloga model, while the switch are CMOS transmission gate.
My question is the SNR calculated from the spectre output is only 33dB, while in Simulink the SNDR is 103dB, i don't know how to solve the problem for many days! Could anyone help me? Thanks 三阶DFT以及transient——response.PNG
 
Last edited:

I would suggest you extend the transient simulation time so you have at least 2^16 samples of BS. Export the BS and do an FFT. For example with a 2 MHz clock for 2^16 you need a simulation time of aprox. 32.8 ms.

BR Jerry
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top