Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Car security using SMS- MCU-cell-phone interface?

Status
Not open for further replies.
I

ingenious

Newbie level 1
Joined
Feb 1, 2005
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
18
mcu car security

hi. I'm doing a college project on car security via SMS. Have a gr8 prolem though. want to knw the best method to interface a cell-phone with the microcontroller.
i want to give the cell phone a mcu o/p signal (generated when there is an intrusion) so tht it sends an SMS to the required no.
have 2 options:
nokia cell-phone with a PIC
Nokia 12

which is a better choice and will be easier to program and implement?
nebody with a similar proj pls help.
hav only a few weeks.

regards
 

car security using a cell phone

I had interface in the past Ericsson phone & worked gr8. I had tested T65, T630, T68i and R320, all performed fine. The connection cable was the ericsson serial cable or any simillar one.

All SMS messages are initiated via AT commands. The only problem is that Ericsson supports only PDU and not text mode.
Personally I suggest SonyEricsson.
 

mcu and nokia cell phone

I'm a newbie in electronics... I'm interested in doing such a project... Could someone explain me a little more clearly on how to go about this project please? Also, if possible please let me know what the PIC and mcu mean... I would be grateful if someone could just give a block diagram on how to do this project...
 

security of car using a cell phone

if possible please let me know what the PIC and mcu mean...
Click to expand...
PIC is an MCU from microchip, more info at https://www.microchip.com
MCU=Micro contrloler unit. Achip with CPU,RAM, ROM & I/O intergraded on a single IC.

As far as this project is conserned, you need a lot of reading and effort to do it. You must learn programming of PIC and then how to communicate with the Mobile phone.
 
Last edited by a moderator:

cell phone interface car security

Does anyone know how I can get hold of a kit like this off the shelf? Is there a company that will supply a mobile phone, sms, pic/mcu board with software?
 

mcu to cell

Im also working on a similar project. But im still not clear about which mobile to use. Im working on Nokia 3310 FBus currently. I even got the complete source code for nokia 5110/6110 fbus protocol in C frm a link suggested in this board. But from what i read on the forums, Mobiles with built in modems suporting AT Commands are better option for mcu.
With this in view i bot an old siemens C35 phone. I`m not sure if its working or not. I tried to interface it with PC using a siemens sw. It does not seem to connect. can anyone pls help me on this.
tnx
sathish
 

car security sms

Thanks for the reply... I'll try reading all the required material and will get back here...
 

mcu to cellphone interface

hi,
i used the gsm module provided by wavecom it works fine with at commands and its interface is standard rs-232.
pimr
 

Hats off to you Regnum...that's a wondeful article... I'll not be able to start the project now, but i'll definitely start it, once i get acquainted with all the required knowledge...
 

hey guys i too taken this same project... i hope this project has done on 2004,so u guys may succeed this project..so can i have the thesis documet of your project..
this will be a grate help...
waitng for your reply

Rimz
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top