Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Howto give differences of Voltages,whenonetransistor is connected in active feedback

Status
Not open for further replies.

pusparaga

Full Member level 4
Joined
Oct 19, 2013
Messages
197
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,298
Activity points
2,988
Sir,
I have used the Avago ATF 54143 transistor to my work and connected the one transistor to other transistor in a feedback mode. How to set the biasing for the two transistors. Feedback transistors how much voltage differences of Vds and Vgs we have to obtain, when we choose Vds= 3V and Ids=60mA.How much voltage differences we have to set for other transistor and two transistors.
If two transistors are used as cascade each other, how much difference of voltages we have to obtain at the cascading transistors.
Whether we have to obtain the absolute voltages or difference of voltages at Vgs or Vds, how much voltage we need to obtain.
I have attached the feedback transistor figure and datasheet of ATF54143 transistor
 

Attachments

  • ATF54143_avago_PHEMT.pdf
    136.8 KB · Views: 65
  • FeedBack_Transistor-Connection.jpg
    FeedBack_Transistor-Connection.jpg
    8 KB · Views: 115

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top