Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Power Factor Correction: Boost Converter?

Status
Not open for further replies.
A

abhinand rd

Member level 1
Joined
Jul 15, 2011
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
bangalore
Activity points
1,516
Hello :)

For active power factor correction technique, most popular choice is boost converter.
I think any topology can be used for pfc, Why is Boost converter most popular choice, why not a Buck converter?

Regards
 

A PFC input stage requires to draw a sine current waveform from mains input, down to ideally zero voltage. That's only possible with a boost converter and a DC bus voltage above peak value of input.
 

There is buck PFC controller UCC29910A. Read slup264 from TI about this kind of PFC.
 
  • Like
Reactions: FvM

    FvM

    FvM

    Points: 2
    Helpful Answer Positive Rating
The idea behind the buck PFC implementation is to reduce harmonics currents to an amount tolerated by the standards instead of eliminating it. Calculating the UCC29910A example design shows that it can achieve a power factor of 0.9 as claimed but not necessarily keep the harmonic current limits. That's the problem when trying to clear the bar very tightly.
 

There is buck PFC controller UCC29910A. Read slup264 from TI about this kind of PFC.
Click to expand...
Hi Velkarn
PFC is possible with many of the topologies with forcing some changes into their topologies but as "FvM" said the best implementation is being achieved by boost converter . boost converter can limit harmonics as well and the input components can be highly reduced so the current through the input will be changed from the deformed wave into the sine wave .
Best Wishes
Goldsmith
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top