Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Changing ouput capacitance of supply according to load

Status
Not open for further replies.
S

Safiya

Junior Member level 2
Joined
Oct 25, 2013
Messages
22
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
0
hi,
Is it recommended to add/remove a capacitor at the output of a boost converter depending on the load , e.g, for low load single cap, for high load 1 + add 1 more.
 

For a boost convert it is recommended you use PFM for low duty cycle <<x% and PWM for > x% then Cap value may be constant.

Since loop stability varies with x% this is often kept high like 25~50%
 
  • Like
Reactions: Safiya

    S

    Safiya

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top