Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

why the frequency response takem -3db down in Cmos analog circuit?

Status
Not open for further replies.
D

dsp15

Newbie level 4
Joined
Mar 14, 2014
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
29
why the frequency response taken -3db down in Cmos analog circuit?

why the frequency response taken -3db down in CMOS analog circuit?

- - - Updated - - -

thanks in advance
 

Hi dsp15,
3 dB is usually meant as Half power.
And it is nothing but 20 Log (0.707) or 10 Log (0.5).

Regards,
Shunmuga Sundaram
 

It's a generally-agreed-upon convention; "-3dB bandwidth"
is what people say when they feel a need to be clear about
the basis.

If you pick some other reference point, you gots to 'splain it
over and over.
 

3dB is a small but obvious change of sound level. Many people cannot hear a change of only 1dB in sound level.
 

For a first order circuit the -3dB point is the so-called pole frequency and gives a phase shift of -45 deg.
For a second-order lowpass circuit, the phase shift at the pole frequency is -90 deg.

Hence, it makes sense to use the pole frequency for describing first and second order circuits.
 

...And, in addition, is the frequency at which asymptotes cut in Bode plots (cutoff frequency or corner frequency).
The term "cutoff" can be a bit misleading for some people, thinking erroneously that something abrupt happens at that frequency. Something rather abrupt happens at the "cutoff frequency" of waveguides, but it's the same term used for something totally different.

Z
 

zorro said:
The term "cutoff" can be a bit misleading for some people, thinking erroneously that something abrupt happens at that frequency.
Z
Click to expand...
Yes - similarly, there are some people thinking erroneously that the amplitude approaches "infinity" at the pole frequency.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top