Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Import touchstone file from HFSS into Ansoft Designer

Status
Not open for further replies.
B

belma1511

Junior Member level 1
Joined
Oct 17, 2013
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
126
I have troubles with import a touchstone file from HFSS into Ansoft Designer. While forming an n-data and seting the path for the s3p file just an 'Error in creating n-port data ' occures. I created the .s3p file frome the Solution data window in order to export S-parameters data from power divider model. Can someone explain me the exact steps in exporting and importing such kind of data?

- - - Updated - - -

If anybody could help I would be really grateful!
 

To export from HFSS
After solving in HFSS, right click Analysis-> Setup. select Matrix data. Check the display all frequencies box and the S matrix box then click Export Matrix Data. name the file and choose the location.

To import to Designer
Project->Add Model->add Nport Model. select Import data under Mode. Browse to the file location and click ok.
under definitions in Project Manager drag the model onto your schematic.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top