Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Dummy device distance to active mos device

Status
Not open for further replies.
V

vrinda.thingale

Newbie level 4
Joined
Feb 17, 2014
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
26
Please anybody help me to know ,Is it neccessary to maintain the same distance between actual device and dummy device in analog layout? Consider less area available.
 

vrinda.thingale said:
Is it neccessary to maintain the same distance between actual device and dummy device in analog layout? Consider less area available.
Click to expand...

Same distance, yes. But to save area, the dummy device doesn't need to have the same length resp. width.
 

vrinda.thingale said:
Please anybody help me to know ,Is it neccessary to maintain the same distance between actual device and dummy device in analog layout? Consider less area available.
Click to expand...

You can place the dummy device with minimum spacing to the actual device..
In case of less area,
Make the dummy device with 1. Same width similar to the actual device.
2. Minimum length..
The above thing is applicable if you're placing dummies on left & right side.
And it is vice versa, if you're placing dummies on top & bottom..

Regards,
Satz
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top