Why spice model of AT-32033 does not show pin number in schematic?

Hi
I am new in RF design.
I add spice model of AT-32033 in ADS (2013.06) but does not show pin number in schematic.
My process of adding is Tools>HSPICE Compatibility Component>Wizard.
Schematic and spice model (file extention .psp) is attached.
Please help and guide.
Thanks in advance.





*SPICE model for AT-32033

.SUBCKT AT32033 60 20 40
LL1 20 25 .05NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T1
C1T1 25 0 .11PF
LT1 25 30 .40NH
C2T1 30 0 .11PF
*
LLB 30 35 .5NH
CCEB 30 50 .04PF
LL2 40 45 .05NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T2
C1T2 45 0 .09PF
LT2 45 50 .33NH
C2T2 50 0 .09PF0

*
LLE 50 55 .5NH
CCEC 50 70 .01PF
LL3 60 65 .05NH
* PI NETWORK TO SIMULATE TRANSMISSION LINE T3
C1T3 65 0 .13PF
LT3 65 70 .47NH
C2T3 70 0 .13PF
*
CCBC 30 70 .04PF
* CALL DIE MODEL
XDIE 70 35 55 AT320
.ENDS

** DIE MODEL (excludes bond wires)
.SUBCKT AT320 75 20 85
CBBP 20 75 .03PF; BASE BOND PAD CAPACITANCE
CEBP 85 75 .03PF; EMITTER BOND PAD CAPACITANCE
QINT 75 20 85 Q320
.ENDS
*
.MODEL Q320 NPN (BF=100, BR=2.5, IS=3.1E-16, VA=20, TF=12PS,
+ CJE=4.6E-13, VJE=1.01, MJE=0.6, PTF=25, XTB=1.818,
+ VTF=6, ITF=5.7E-2, IKF=2.5E-2, XTF=4, NF=1.03, ISE=9.5E-13,
+ NE=2.5, RB=9.78, RE=0.61, RC=35.97, CJC=1.8E-13, CJS=1.7E-13,
+ XCJC=0.20, PS=0.8, MS=0.5, PC=0.76, MC=0.53)