Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

robot follower human....

Status
Not open for further replies.

RISCIT

Junior Member level 1
Joined
Dec 30, 2011
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,441
hello,

have you an idea how can i do to detect a human with a robot just using ultrasonic sensor? i want to make a robot follower human by only using ultrasonic sensor, i dont care about the precision thank you
 

A motion detector operates on ultrasonic waves. Just like sonar or radar.

However it does not detect direction. It only detects that something is moving in its field of view.

So you might get results if you were to mount a motion detector on the robot, and sweep it right-left-right-left continually. If it picks up someone moving, you'll know the direction at the moment it triggers an alert.

Then if the person continues moving, the motion detector will continue to trigger alerts, as its field of view sweeps across the person.

On second thought, this will not work. A moving motion detector will think everything is moving.

It will work better if you use an infra-red detector. The operating principle is the same as above, except you probably can move the sensor much more slowly. It depends on its resolution.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top