Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Characteristic Z of coplanar waveguide

Status
Not open for further replies.

peanutnjelly

Newbie level 6
Joined
Oct 6, 2013
Messages
11
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
85
Hello.
I'm using free saturn PCB toolkit to determine characteristic impedance of coplanar waveguide. But I get strange results.
In my opinion the impedance of coplanar waveguide should match the impedance of microstrip line when distance between GND on top and line goes to ∞ and the rest of distances are the same.
But the calculator say's that impedances are not equal.

Results matches the online calculator:
https://chemandy.com/calculators/coplanar-waveguide-with-ground-calculator.htm

I gues that equation for coplanar line is only valid for small distances W in comparison of h and S.
 

You are right. I think something is wrong there. For example for CPW we get about 3 ohms impedance variation for distances of the top ground to the line, between 20mm and 100mm. When for such distances should be practically no big impedance variation, because both distances are greater than 3x line width.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top