Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

can't send SMS using GSM modem

Status
Not open for further replies.
S

S.P.S

Member level 5
Joined
Oct 30, 2011
Messages
89
Helped
19
Reputation
38
Reaction score
19
Trophy points
1,298
Location
Thodupuzha, India, India
Activity points
1,742
hi,

I am using Fargo maestro 20 gsm/gprs modem with bands 900/1800.

When i communicated with it using hyper terminal i got responses for all the at commands normally.when a message is received new message indication is obtained and i could read the message from that location.i can also dial a number.

but my problem is when i try to send an sms, it always gives error. after i gave the command 0x1a the modem waits for some time and gives the error message. is it damaged?

i checked two of the same modem and got one working properly and other one got the same problem as in first.

What could be wrong?


thanks in advance..
 

jayanth.devarayanadurga said:
Post code.
Click to expand...

He is just testing gsm modem using a terminal program. There is no source code yet.

@S.P.S.

If you are testing the AT+CMGS command to send a text message, you should input the CNTL+Z character after you type the text message and not the 0x1A character or the carriage return or the line feed character

- - - Updated - - -

ah my bad... 0x1A is the control+z character...

Ignore my previous post.

@SPS

Maybe you can post here the response of the GSM modem, the one showing in the terminal program
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top