Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Static and Dynamic Power dissipation calculation in EDA tool

Status
Not open for further replies.
P

Pradeep.p

Newbie level 1
Joined
Oct 14, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
Can any one tell me how can i calculate the static and dynamic power in any eda tool...like microwind,tanner or LT spice...with an example of simple gates like inverter...????
Please help....
 

If you use tanner, add .op to find operating point. It will give you static power.
For dynamic power, take inverter for example, perform a DC simulation at input. The power is peak when Vin=Vout. Measure the power from 0 to 1V. Dynamic power = Total power - static power.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top