Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[51] Flash verify error in progisp 1.72 while dumping into at89s52

Status
Not open for further replies.
V

vasantbbsr

Newbie level 3
Joined
Nov 13, 2013
Messages
4
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
22
Hi,
I've made USBASP programmer with ATMEGA8 mc and falshed the firmware successfully.I am getting the flash verify errors while flashing the program into AT89S52 mc. Am using Progisp 1.72 software.Please help me...
 

Thanks for your reply. I am trying with that hex file only. Is there necessity of any specific crystal frequency. I am trying with 11.0592mhz and 8mhz.
 
Last edited:
  • Like
Reactions: rondla

    R

    rondla

    Points: 2
    Helpful Answer Positive Rating
I have worked with AT89S52 and used an external Flash(ISP) programmer, only hing is At89s52 doesn't have internal ISP(in system programmable), hence we need to get external programmer while comparing to atmega8,as it has internal ISP.

No consideration for crystal, if you want to work with 8051 architectured controller with ISP, I suggest Philips 8051 controller shich you can program using Flash programmer.

Check the link for ISP programmer to work with AT89S52.
https://www.alibaba.com/product-free/120832577/AVR_8051_Programmer_USB/showimage.html

You can find similar third party programmers with dealer.
 

I resolved this issue successfully. we should not use the lengthy cables from programmer to target board.
Feeling happy...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top