Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

no reply from ethernet port

Status
Not open for further replies.
S

Somya Aggarwal

Newbie level 1
Joined
Nov 20, 2013
Messages
0
Helped
0
Reputation
0
Reaction score
0
Trophy points
0
Activity points
20
I have a device having 3 FE ports.

I have given ip to all the three ports of different subnets .Then one by one when i ping
these ports from laptop.i get reply from all the three ports.
However when I give ip to these ports of same subnet, then i am able to get reply only
from eth0.

Also note that first ethernet port is controlled by one phy, and rest two ports by other
phy.

I can't come to a possible conclusion for this behavior. Any insight from this behavior
anybody?
 

Maybe, your subnet settings is like that it neglects the other ports connected apart from one.
 
Last edited:

Vengateswaran said:
Maybe, you subnet settings is like that it neglects the other ports connected apart from one.
Click to expand...

Thanx a lot, and please can you help me changing those settings?

- - - Updated - - -

can you please explain a little more in detail
 

When you are pinging your ports individually, you can get their ip address. When you are connecting all together, collision occurs. hence, you have to go for hubs or switch techniques.
 

Are you using Linux?

On most OS, you can´t assign IP on same subnets to different ports - at least not as a normal behavior (maybe there is some trick to do so). You must have different subnets IP on each port (for example, eth0 = 192.168.0.1:ffffff00, eth1 = 172.16.0.1:ffff0000, eth2 = 10.0.0.1:ff000000)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top