Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Port settings for CPW struture in ADS.

Status
Not open for further replies.
L

lray

Newbie level 4
Joined
Oct 24, 2013
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
46
Hi everyone,
I have just started working in ADS.I have designed CPW fed patch antenna but i am getting different frequency response of this structure in ADS compared to IE3D.If anyone knows how to work with ports (ground reference for two ground plane for a reference pin for central conductor),please help me with ports assignment. Thanks
 

Hi lray,

It sounds like you already know what to do. Set the center stripline port to port 1, and assign the ports touching either ground plane as a ground reference for port 1.
 

Thank you for your quick response.I am stuck with port assignment for ground plane.Can you help me how to assign the ports for ground plane as ground reference for central conductor strip?Is there any tutorials for CPW antenna design in ADS ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top