Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Assembly code solution needed!!

Status
Not open for further replies.
It's a very simple flow chart, you don't have to understand it, just draw the appropriate box shapes and join them with lines and arrows.

Brian.
 

I missed the class last year, so, it's really troublesome understanding the concepts. Anyways, thanks, Brian!
 

I hope you understand what the code is doing.


Edit: There is a mistake in flowchart. I will upload the new one.

PHP: 
;initialization of regiaters

Immidiate value 0x01 is loaded into register R2
Immidiate value 0xF0 is loaded into register R3

;main code starts from here

register R0 is loaded with 0x81

registers R2 is ANDed with R2 and result stored in R2	; 0x01 AND 0x01 = 0x01

If result of previous operation was 0 then jump to label xyz else continue

;continue code

	load register R0 with 0x82
	registers R0 and R3 are ANDed and result stored in R0
	unconditional jump to label wzp


;xyz code

		load register R0 with 0x82
		register R0 and R3 are ORed and result stored in R0
;wzp code	contents of register R0 is stored at address 0x82
		unconditional jump to start of main code
 

Attachments

  • fc.png
    fc.png
    39.2 KB · Views: 60
Last edited:
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top