Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I think it is almost as in a free QUCS simulator. You just need to find probes in palette, put probes, do some time-domain simulation, then add rectangular plots and choose probe names (I, V, etc.). For example, for Ids you must put "I"-meter circle to the drain or source pin. Biasing must be provided (voltage sources). Add some DC/AC simulation blocks.
For voltages, you should assign a net name for voltages which you're interested in , for currents, you should connect a I.Probe component in series at the branch which you're interested in then you have to do a transient simulation to get voltage/current versus time.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
