Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Excitation of wire using current source in HFSS

Status
Not open for further replies.
H

h_cet

Member level 4
Joined
Jan 25, 2006
Messages
69
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,771
Dear All,

I would like to excite the wire using current source in HFSS... the wire is cylinrical and its radius is 1 mm... length is 25 cm... my opearing frequency is 900mhz - 2000 mhz... In picture you can see the excitation... currentExcitaion1.JPG

Also my HFSS design in atached file..

simulaion starts, nevertheless there is no progress for a long time...

If you could explain at least about whether or not the desing is true, I will be glad...

kind regards...

Harun
 

Attachments

  • project.rar
    13.3 KB · Views: 56

In this study, I want to realize Single-wire transmission line or Goubau line... So, I try to excite the line by using current source... Actually I dont know how to design single wire transmission line (goubau line)...
 

Here, is what I want to make a simulaion...

pic2.JPG

As seen in Pic-2, there is a network analyzer and the network analyzer is used to excite a single wire... the wire has a adapter at its each both end-sides... and terminato... How to design the system I dont know... I have realized that here is a wire whose radius and length are 1 mm and 25 cm, respectively... and I excited it using current source...

If you have any idea about the exciation of single wire, I will be glad...

thank you very much for your interest, in advance...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top