Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ferrite core Sine wave inverter ( plz help )

Status
Not open for further replies.
P

pakkiboy

Member level 1
Joined
Aug 4, 2013
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Location
Jeddah, Saudi Arabia, Saudi Arabia
Activity points
222
Dear members, I have designed full bridge rectifier for pure sine wave inverter using microcontroller and IR2110. I have given 12 V to ir2110 . in start i give 12 V DC to drain of mosfet , worked well with good sine wave , then i have increased voltage to 30 V and then to 60 V , everything fine ( good output sine wave ). Then i have tried to give 300 V DC to drain of mosfet. but mine circuit blown :( :sad: , i have tried this many times but mine circuit always blown for high voltage ... work well for 60-70 V DC when i have used power supply . any help plz plz .
Mosfet : irf 3205
Driver ic : ir2110
capacitor : 33 UF and then also of higher values .
Can anyone plz plz help me

Circuit
https://obrazki.elektroda.pl/4660519100_1379535325.png
 

irf 3205 can not work at that high voltages. See datasheet. Try with IRF460.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top