srini.pes
Member level 3
- Joined
- May 28, 2010
- Messages
- 61
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,288
- Location
- NIT calicut
- Activity points
- 1,725
Hi to all.,
I have designed one inverter.
The DC characteristic was very good and i checked the output of the circuit
inverter followed by inverter.
INV => INV.
The two outputs were good.
When i gave a pulse to check the transient response, the output was not coming.
it is coming like a spike in positive half (for positive half of input) then reducing and
maintaining a constant (-Ve ) value.
What may be the reason for this error ?
Thanks
SRINI
I have designed one inverter.
The DC characteristic was very good and i checked the output of the circuit
inverter followed by inverter.
INV => INV.
The two outputs were good.
When i gave a pulse to check the transient response, the output was not coming.
it is coming like a spike in positive half (for positive half of input) then reducing and
maintaining a constant (-Ve ) value.
What may be the reason for this error ?
Thanks
SRINI
Last edited:
