Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] D flip flop - outputs are short circuited .Something wrong here ?

Status
Not open for further replies.
S

sankalaani

Newbie level 2
Joined
Jun 3, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
0
I attached test paper that given to me at a exam.
I think something wrong in red underlined d flipflop.
Both Q and Q-ba are short circuited and connected to the input.
And Q=1 and Q-ba = 0.
Is it possible this question is correct.
(please ignore erased parts. they are my handwritten notes by me )
 

Attachments

  • 02092013062.jpg
    02092013062.jpg
    476.1 KB · Views: 74
  • 03092013064.jpg
    03092013064.jpg
    289.5 KB · Views: 68
Last edited:

So it means this question is wrong ? Because Q ba connected to Q.
 

There is 1 printed right side of Qx and 2 printed right side of Qy. These 1 and 2 means TP1 and TP2 (Test Points).
A small bar is used to connect Qx to TP1. Due to this small bar it seems that Qx is connected to Qx bar connecting wire.
Yes, the question is confusing.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top