Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Inserting components into HFSS

Status
Not open for further replies.
H

Hasan7

Newbie level 4
Joined
Mar 23, 2013
Messages
6
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,319
Hello everyone,
I would like to ask if there is a possibility to insert common components and particularly a coil (normal wire coil) into HFSS. I have already used the helix command to design a coil but I didn't find it effective. I would be grateful to anyone who can help
Thanks
 

What was ineffective about the helix? Or how are your coils different than a helix? If you just want a lumped inductor value you can use a lumped port internal to HFSS export the Sparameters and then use another software like designer to add a lumped inductor at that port in a circuit simulator.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top