Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Best way to synchronize ADC, DAC, and DSP uP on the same boa

Status
Not open for further replies.
A

andy1

Full Member level 2
Joined
Jul 24, 2004
Messages
124
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,296
Activity points
1,205
What would be the best way to synchronize all the hardware on a real-time dsp system?

Is it better to use an external clock module and feed the clock to all the modules on the board?

Or use the uP clock to synchronize the ADC and DAC?
 

Re: Best way to synchronize ADC, DAC, and DSP uP on the same

Hi Andy the best way to synchonize or the way I did it on a uC interface was to use an external clock. The biggest advantage or rather the flexibility I got was to have a clock divider circuit for each module so as to make them operate independently.
 

    A

    andy1

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top