Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Dual inverting Schmitt trigger IC with 100mA output

Status
Not open for further replies.

adnan_merter

Full Member level 3
Joined
Jan 23, 2008
Messages
160
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,298
Location
The most beautiful city of the world
Activity points
2,526
hi guys,

i am designing a ir transceiver and i need a schmitt trigger inverter to invert my rx and tx signal which goes to ir emitter and comes from phottransistor.

i found some ic's which are doing this job, but the problem is i need additional transistors to drive emitter and photodiode because the output current is 25mA and i need 100mA,

do you know any inverting schmitt trigger ic with 100mA output current,

here is 25mA ic

**broken link removed**

thanks
 

MC74AC14 (ACT14) - sink source is 50mA and it is hex part. So take 2 outputs and parallel them.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top