Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

folded-cascode operational amplifier design

Status
Not open for further replies.
P

Patrick Yang

Junior Member level 1
Joined
Jul 18, 2013
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,415
Hi guys，
I‘m a freshman in IC design. I try to design a folded-cascode opa, and i met a problem that when Vcm increases, the Av and GBW also increase and vice versa. simulation shows that the gm changes little inspite of increasing in Vcm. GBW = gm/Cc, this value shouldn't change. I really need help !Thank in advance QQ图片20130723095840.jpg
 

Av (and so GBW) changes over the CMR (common mode range), s. e.g. here:
 

Attachments

  • Cadence_Characterizing_Differential_Amplifiers_p29.pdf
    52.4 KB · Views: 112
erikl said:
Av (and so GBW) changes over the CMR (common mode range), s. e.g. here:
Click to expand...

THx for u help, still i want to know about why Av changes much when Vcm varies. I read the pdf, personally, i think in the ICMR, the Av changes little in spite of Vcm changes, while out of ICMR, distortion appears. Is it right?
Thank U in advance
 

Patrick Yang said:
... still i want to know about why Av changes much when Vcm varies.
I read the pdf, personally, i think in the ICMR, the Av changes little in spite of Vcm changes
Click to expand...

This depends on the definition of the ICMR. Sometimes it's defined for 2% Av drop, sometimes for 5%, 10% or even 50% Av drop.
The Av drop is due to a degradation of the operating point of one or more transistors (shifting from saturation region --> triode region, less gm).

Patrick Yang said:
... while out of ICMR, distortion appears. Is it right?
Click to expand...
Yes. So farer from ICMR, so more distortion.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top