Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what is this COMPONENT pls give information about.

Status
Not open for further replies.
P

peter_england

Full Member level 4
Joined
Jul 24, 2012
Messages
199
Helped
11
Reputation
22
Reaction score
11
Trophy points
1,298
Activity points
2,478
please give information about this component and any substitute for it I cant find it on web Its a Transistor on Laptop motherboard. part.jpg
 

Hi Peter,

Did you try to find circuit (service manual) for that motherboard ?

In SOT-23 case besides transistors we can have diodes, triacs, zeners, .... with various internal connections and purposes.


Code is NI50 ?


I supose laptop give up one week after warranty expiration (Dell or HP) ?



Best regards,
Peter

:wink:
 

Thanks tpetar , I tried but i cant find the service manual for That motherboard. The motherboard P/N is 37GL53010 -C1 .
 

Laptop Is Wipro WLG111000

- - - Updated - - -

Laptop Is Wipro

- - - Updated - - -

I THINK it is N15C
 

peter_england said:
please give information about this component and any substitute for it I cant find it on web Its a Transistor on Laptop motherboard.View attachment 93852
Click to expand...

Watch out peter, it looks like it has been soldered before and went again so problem may be somewhere else. Just replacement won't do.
 

Burt have good observation, Q35 is out of solder mask part place, you see Q34 is in place. Maybe Q35 is the same as Q34.


Best regards,
Peter

:wink:
 

tpetar said:
Burt have good observation, Q35 is out of solder mask part place, you see Q34 is in place. Maybe Q35 is the same as Q34.


Best regards,
Peter

:wink:
Click to expand...

burt007 said:
Watch out peter, it looks like it has been soldered before and went again so problem may be somewhere else. Just replacement won't do.
Click to expand...


Thanks Both you but I have checked and found no such thing its on its proper place just little bit bigger than Q34 and its burnt so i just want it to replace and one more thing that it is seen as this because reflection of Camera flash nothing other than that , and actual position is right. thanks please find out that part ..

- - - Updated - - -

clear.jpg Here is the clear picture .. Thanks.

- - - Updated - - -

clear.jpg Here is the clear picture .. Thanks.

- - - Updated - - -

clear.jpg Actually these two pins are got shorted by mistake and that transistor burnt.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top