Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Antennas for millimeter wave radar application

Status
Not open for further replies.
J

jiyaa

Newbie level 6
Joined
Apr 23, 2013
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,374
hello,
I am interested in doing my masters project in the field of radars and I have opted to design antenna for millimeter wave radar. Can any one guide me which antennas are most suitable for millimeter wave radars and their scope as well so that I can extend my project work in phd

thanks
 

Antenna types are selected according to radar type and application.

Some radars use low power and have a wide field of view; then patch or horn antenna is suitable.,

Other radars use high pulsed power and need a narrow beam width, and often must scan the scene. The classical approach is a parabolic dish with a mechanical scanner. Modern radars use phased arrays and electronic scanning.

There are MANY radar applications and versions. You should learn your topic with one particular application in mind. Then compare available antennas and select the best.
 

jiripolivka said:
Antenna types are selected according to radar type and application.

Some radars use low power and have a wide field of view; then patch or horn antenna is suitable.,

Other radars use high pulsed power and need a narrow beam width, and often must scan the scene. The classical approach is a parabolic dish with a mechanical scanner. Modern radars use phased arrays and electronic scanning.

There are MANY radar applications and versions. You should learn your topic with one particular application in mind. Then compare available antennas and select the best.
Click to expand...
Thankyou so much for reply. Actually I am confused in selecting the antenna because I want a project that can have a future extension as well so that I can continue my work in phd. I am thinking to go for dual frequency, dual polarization stacked antenna. Can you suggest, will it be ok
 

For a "dual frequency" you should define the bandwidth. Dual polarization needs two independent orthogonal feeds and a symmetrical aperture. Conical horns can meet those criteria and serve as primary or secondary feeds in a higher-gain parabolic dish.
 

PLs read this paper "Planar High-Gain Dielectric-Loaded Antipodal Linearly Tapered Slot Antenna for E-and W-Band Gigabyte Point-to-Point Wireless Services " by Nasser Ghassemi, Student Member, IEEE, Ke Wu, Fellow, IEEE
Ke Wu is working on SIW structures for W band such as mono pulse antennas which are important radar
this topic is novel and too valuable
ferdows_j@yahoo.com
 

ferdows said:
PLs read this paper "Planar High-Gain Dielectric-Loaded Antipodal Linearly Tapered Slot Antenna for E-and W-Band Gigabyte Point-to-Point Wireless Services " by Nasser Ghassemi, Student Member, IEEE, Ke Wu, Fellow, IEEE
Ke Wu is working on SIW structures for W band such as mono pulse antennas which are important radar
this topic is novel and too valuable
ferdows_j@yahoo.com
Click to expand...

If you like it and if it meets your specification, why not? As this antenna was designed for radio links, check your output power and side lobes. Radars usually need such parameters met.
BTW I have no access to IEEE papers.
 

@ferdows
Upload the paper plz..

- - - Updated - - -

@ferdows
Upload the paper plz..
 

because of copy write upload ieee paper here is forbid u can eamil me
 

my email
electronicmale9@yahoo
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top