Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved] And Gate for 24v DC signals

Status
Not open for further replies.

shatruddha

Full Member level 2
Joined
Nov 24, 2009
Messages
141
Helped
19
Reputation
38
Reaction score
19
Trophy points
1,298
Location
india
Activity points
2,177
HI I was working on a project where all the signals are at 24v and I needed to do an AND operation. So I was wondering if there are any from the shelf ICs which operate at this voltage.
And if they exist how feasible is it to procure them
 

The logic can be made as discrete DTL circuit.

Another option is to use 15V CD4000 CMOS with voltage dividers and output level converters.

Special high-voltage ICs have been previously made, e.g. SAA1029 (from Signetics or Valvo, I think).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top