Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CAN bus messages in AC powerline

Status
Not open for further replies.
V

vamanan

Full Member level 2
Joined
Aug 9, 2005
Messages
135
Helped
10
Reputation
20
Reaction score
4
Trophy points
1,298
Location
India the Great
Activity points
2,286
Hi,
I want to send CAN bus messages through 110V AC Power line. Can anybody help me in deciding whether it is possible or not ?. If possible can you suggest suitable Power Line modem to be used. I am unable to get the information from google.
Regards,
Vamanan Kutty
 

Take a look at the communication method used in X10 home automation. It sounds similar to what you wish to do.

Messages are sent during the time where the mains AC waveform crosses 0V.
 

From the physical layer standpoint, one of the main attributes of CANbus, namely its differential signaling, would be lost.

Additionally, X10 and other powerline related communication protocols are very low speed.

- - - Updated - - -

From the physical layer standpoint, one of the main attributes of CANbus, namely its differential signaling, would be lost.

Additionally, X10 and other powerline related communication protocols are very low speed.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top