Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB hub supporting configuration from an external microcontroller

Status
Not open for further replies.
A

allsey87

Member level 4
Joined
Sep 27, 2010
Messages
70
Helped
17
Reputation
34
Reaction score
17
Trophy points
1,288
Activity points
1,902
Hi All,

I'm looking for a USB Hub controller (High/Full speed, v2.0, 2+ ports) that supports configuration by acting as a SLAVE on either a I²C or SPI bus. There are lot of hubs out there that do have I²C or SPI port, but it is configured as a MASTER for accessing memory peripherals like EEPROMs.

Does anyone know of such a IC that supports configuration via an external microcontroller over either I²C or SPI as SLAVE?

- - - Updated - - -

Ah found one! I really had started to think that such a thing didn't exist:
http://www.smsc.com/Products/USB/USB_Hubs/Standalone_USB_Hubs/USB3503
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top