Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

.bin file instead of .hex file

Status
Not open for further replies.
embpic

embpic

Advanced Member level 3
Joined
May 29, 2013
Messages
742
Helped
80
Reputation
160
Reaction score
77
Trophy points
1,308
Location
india
Activity points
5,213
hello sir's
Till now i had use a only .hex file for burning into ROM. i don't have any idea how to burn .bin file in ROM or what is use of that file.
& how to genrate this file.

i am using KEIL with p89v51rd2.
thanx
 

.hex file and .bin file what is difference

- - - Updated - - -

and flash amgic support only .hex file so how to burn that .bin file into controller.
 

i am using but i want to use with this file and want to know how to burn such file.
 

A HEX file contains a check sum for each 16 bytes of data, so a error will be flagged if there is any data corruption. A bin file is a straight data file and contains no check sum. You should always use a HEX file if at all possible.
 

thanx sir.but sir my question is still i want to know plz.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top