Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Polygons and routing

Status
Not open for further replies.
P

pyrohaz

Member level 1
Joined
Jun 4, 2013
Messages
32
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,523
Hey guys,

I've designed another PCB on eagle using polygons as pads, i've renamed them to link to the nets on my schematic and added isolation spacing.

When I click ratsnest, they don't fill in and there are also no airwires from the poly's to the parts on my schematic. How can I fix this?

Cheers,
Harris
 

When you rename a polygon with the same name of a net, an airwire should appear. The polygon will only fill if a trace of its net cross it somewhere. This is what should happen. From this you are decribing, looks like the polygon and the net do not have the same same. Check if the name are really the same. You could send an image so I can have a better idea on what is going on.
 

Ah! I didnt know that its nets had to cross, I put a trace through it and it has now filled in.

Thanks dude!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top