Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Help] Receiver design test equipment

Status
Not open for further replies.
C

cmosbjt

Full Member level 5
Joined
Apr 25, 2004
Messages
250
Helped
10
Reputation
20
Reaction score
2
Trophy points
1,298
Location
USA
Activity points
2,293
To test the following blocks in receiver, what equipment do i need?

LNA: (NWA, NFA, Spectrum A)
Mixer: ?
VCO: ?
PLL: ?
IF ADC, Filter ... ?

Thanks.
 

These can be used:


LNA: (NVA, NFA, Spectrum A)
Mixer: (NVA, NFA, Spectrum A)
VCO: Spectrum A or dedicated insrument (PN9000 from aeroflex is an example, but Agilent has it's own dedicated intrument, check the web)
PLL: Spectrum A or dedicated insrument (PN9000 from aeroflex is an example, but Agilent has it's own dedicated intrument, check the web)
IF ADC, Filter: for the filter a Spectrum A, for the ADC I don't know...

I hope it can help
Mazz
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top