Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

EEPROM reading with pic16f877a in ccs c compiler

Status
Not open for further replies.
J

john120

Banned
Joined
Aug 13, 2011
Messages
257
Helped
11
Reputation
22
Reaction score
10
Trophy points
1,298
Activity points
0
hello everybody,I want to ask you,the requirements for reading serial eeprom;I would like to read an EEPROM and copy its content to another EEPROM all interfacing with PIC16F877A
can some body help me to do that?

My previous Micrcontroller is not reading the EEPROM so I want to change the microcontroller and read the same data in the EEPROM is it possible?

What is the techniques used when interfacing a microcontroller to EEPROM os that ,the LCD can not display anything as long as the EEPROM is not in the circuit?

Thanks
 

It depends on what type of Serial EEPROM you are using.

Mostly I2C Eeprom are used, You can connect many devices in I2C bus around 127 i think.

So i think you can connect both eeproms on i2c bus(make sure that both must have different address).

You can you i2c function inbuilt in ccs compiler to do your task.
 

xpress_embedo said:
It depends on what type of Serial EEPROM you are using.

Mostly I2C Eeprom are used, You can connect many devices in I2C bus around 127 i think.

So i think you can connect both eeproms on i2c bus(make sure that both must have different address).

You can you i2c function inbuilt in ccs compiler to do your task.
Click to expand...

I am using 25LC640 Serial EEPROM i has some data in it which I want to read using PIC16F877A how can I proceed?
Thanks
 

Did you notice the 25640 driver code shipped with CCS C?
 

xpress_embedo said:
Mostly I2C Eeprom are used, You can connect many devices in I2C bus around 127 i think.

So i think you can connect both eeproms on i2c bus(make sure that both must have different address).
Click to expand...

Just one addition to this, can be interesting, number of 127 devices on I2C bus is general story, but in real life this is little different. Some I2C devices such as EEPROMs have different addressing scheme defined by manufacturer for that particular product, some of them are limited to 2 per bus, some 4, some 1, .....

For each part which works on I2C bus, and how that part works on I2C bus including maximum number and other thing, the valid source of specification is manufacturers datasheet.


Post #2 in this thread:
https://www.edaboard.com/threads/289297/


;-)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top