Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need help on avr programing in codevision avr

Status
Not open for further replies.

vvarlord

Member level 4
Joined
Mar 15, 2012
Messages
74
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
1,756
hi
i have a programmer board which i used to worked with it correctly.
model : stk500
but now any chip i want to program it gives the error like:avrisp error leaving programing mode
back then , when it worked if i didn't put any chips on the board a led would trun on before it warns me that there isn't any chips
by the way this program has to methods to program an avr chip: 1) to put the chip on the board of programmer 2)use a cable to program it on the circuit(i think it is isp method as it stand for in system programming)
and before this happens the second method didn't worked(about a week ago it worked)
any help would be appreciated

//////////////////////
regards : Reza Balaei
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top