Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC controller clock range and data rate.

Status
Not open for further replies.
S

Siddft

Junior Member level 2
Joined
Oct 19, 2012
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Bangalore
Activity points
1,432
Hello all,

What is the PIC SPI protocol clock frequency range and data rate range??



Thanks,
Siddesh
 

Siddft said:
Hello all,

What is the PIC SPI protocol clock frequency range and data rate range??
Thanks,
Siddesh
Click to expand...
It depends on PIC so you should check the datasheet. give me your part number. I saw till 25Mhz
 

I am using PIC18F4550 and PIC18F4520.
 

We can set the SPI freq by changing the values of TMR2 prescaler value.
Timer2 Output / 2

Ref: PIC18F4550 datasheet page no. 199

chk SSPCON1 register BIT SSPM3:SSPM0: Master Synchronous Serial Port Mode Select bits

Note:
4: PR2 = 0x00 is not supported when running the SPI module in TMR2 Output/2 mode.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top