Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

microphone circuit design

Status
Not open for further replies.

xwcwc1234

Full Member level 5
Joined
Jul 21, 2001
Messages
284
Helped
7
Reputation
14
Reaction score
1
Trophy points
1,298
Activity points
1,753
Hi ,
I need to design a microphone preamp circuit using CMOS technology. Anyone knows what is the detailed spec. for microphone , that means , does the preamp need very low noise or high gain ?
 

microphone circuits design

The noise should depend on the overall SNR (for audio application, usually not very high >85, a-weighted). THD not need high >60dB.
and it may not need high gain but a programable gain (0-30dB)with some anti-alising filter.
other spec such as input swing, input resistance>10kohm, power and area.
addition function is need such as mute and power up/down.
 

To LCI ,
Thank you . Do you have some reference materials on this subject(papers , thesis , or others) ? Can you upload here ?
 

For spec., u can go to some microelectronic company to download their data sheet,
e.g., http://www.wolfsonmicro.com/products/digital_audio/
Also, when u design the microphone, u should also know the whole ADC channel
and other part which is connect to microphone,
e.g., the ADC is discrete time circuit, u need to know the ADC sampling frequnecy and resolution in order to calulate the settling spec for the microphone.
hope this help.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top