Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

UHF probe HFSS simulation: available for 565MHz-->convert to 433MHz and theory

Status
Not open for further replies.
S

ssadi

Newbie level 1
Joined
Jan 7, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,289
So here's the UHF probe simulation in HFSS, it's quite detailed: **broken link removed**
I want to build a UHF probe of similar design, but one that is optimized for 433MHz. Unfortunately, I have no idea how the UHF probe works. Do you know any books or online resources which will allow me to learn the theory behind its operation, so that I can modify it for operating at 433MHz? Any suggestions to make the uhf probe parameter change in hfss too to make it optimized for 433MHz would be highly appreciated by me, which do not count for much but still please help :)
 

The link that you have posted is not responding, so let me just make a suggestion:

Try scaling the entire design from x to 1.305x. This corresponds to the change in frequency which is from 565 to 433, i.e. 565/433 = 1.3048. Thus the design should remain the same in terms of wavelength normalised lengths.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top