Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Modelling SPDT switch in ADS

Status
Not open for further replies.
M

monolothics

Junior Member level 3
Joined
Mar 26, 2012
Messages
30
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
Indonesia
Activity points
1,491
Hi
i want to design a phase shifter in microstrip
and i want to use macomtech MASWSS0192 SPDT switch
what i want to ask is how can i modeling the SPDT switch in ADS??

here's the datasheetView attachment MASWSS0192.pdf
 

Hi monolothics,

you could insert within a Dataset the S param from the SPDT part into your schematic. Of course you nedd two diferrent sets of S param for both states of the SPDT.

this technique can be also useful for cosimualtion with momentum.

Regards

Marco
 

Hi marco,
thanks for the reply

i get the idea, but i'm kinda new in using ADS so
how exactly the procedure is done in ADS??
 
Step 1: First draw the Momentum Layout -----> Simulate it----->select momentum ---->select component create update-----> dialogue box will open---> select the add reference pin box---->select OK or apply.

Step 2: Go to schematic drag the layout file from project to the schematic, the component will be available in the schematics for simulation with S parameter file of the SPDT switch
 

hi shashy.br

thank you for the reply
it is very helpful

but what do you mean by draw?? i mean what should i draw??
and how?? i know how to draw a microstrip line but is it the same?? or there's another technique??
 

Pls explain your requirement in details.

what is the frequency of operation?

what is the phase shift requirement?
 

hi thanks for the reply

this is my requirement
the frequency operation is 2.4 Ghz
the phase shifter is 3-bit so there's 8 phase state
 

yes i've seen that phase shifter
but,here's my work so far in designing 3-bit switched line phase shifter
i've already design each branch (reference state and delay line), and simulate it using schematic based on this link

**broken link removed**

the result is good.
but i haven't design the phase shifter while the SPDT switch is mounted in the circuit
so i want to know how to modelling the SPDT switch in ADS using the macomtech SPDT switch that i've mentioned above
 

Hi,

you have to include your SPDT switch S parameter within a 3 port Data Item into your phase shifter schematic. S parameter(that have to be imported into the data item, touchstone format .s3p) have to correspond to the SPDT switch state that you want to simulate. Then you could run a second simulation for the second state.

You have to choose Data Items on your palette --> then select S3P component -->place it into your schematic --> double click --> browse for your SPDT s3p file and that's all.

Simulation range has to be within manufacturer specified frequency range for the s3p file!

Good luck!

Marco
 

@monolothics

Marco_A_Llamas is right , use the S parameter file from the Vendor.

just ask for the s3p files for both the states of the SPDT switch!!!!

also i recommend SKYWORKS switches since they provide a better isolation than that you have selected.

Just check the part number SKY13286-359LF from sky works!!!
 

Hi,

shahsy.br and marco thank you so much for the help
i'll try what you've been sugested

thanks

- - - Updated - - -

Hi,

shahsy.br and marco thank you so much for the help
i'll try what you've been sugested

thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top