Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to export HFSS's 3D model file to AutoCAD2004?

Status
Not open for further replies.
K

kenzo4369

Newbie level 5
Joined
Aug 10, 2004
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
62
Dear all:
I'm using HFSS 9.0 now and I want to export my HFSS 3D model file to AutoCAD2004,
but it seems that HFSS 9.0 doesn't support .DXF.....XD(I don't have HFSS 9.2)
I can just export my HFSS's file as .sm2, .sm3
Could anyone plz tell me how to convert HFSS's file into AutoCAD,thanks a lot!!:)

Sincerely
Daniel
 

draw your model in the autocad2004 then convert it to HFSS
 

Dear Daniel.
I'm think if you export your HFSS's file with .sat
format than import it in Solid Work software
, then you can export it to CAD format.
 

there has to be a better way than that.

Even with HFSS 9.2 which allows direct export to dxf. I notice it only exports the HFSS geometry on the xy plane. This results in a 2D AutoCAD design.

Is there a way to export the 3D geometry from HFSS to have the exact 3D geometry in AutoCAD
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top