Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need solution on voltage level translation

Status
Not open for further replies.
V

vishu489

Advanced Member level 4
Joined
Aug 28, 2011
Messages
116
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
2,120
hi friends I'm trying to interface glucometers with atmega16 on uart. but the problem is that one of my glucometer gives LVTTL interface logic(0 to 3.3v) and another one gives rs232 signal (-12V t0 +12v)
and one more glucometer gives TTL o/p (0 to 5v). but the problem is that my controller is capable to read signal ranging from 0 to 3.3v. so how can i make my atmega16 uart compatible with all 3 meters.
basically i need voltage conversion solution so that what will be the voltage coming from glucometer , it should be converted into voltage compatible with atmega16 uart. thank you in advance:lol::lol:
 

thanks for your reply. but that solution i already know . i don't want to change hardware every time i change my glucometer. i want one global solution such that i can maintain compatibility with different glucometer.

i wanted to do something as below

glucometer(o/p: LVTTL, TTL ,RS232) -------> VOLTAGE TRANSLATION---------> ATMEGA16 UART

that voltage translation must have to sense this logic and convert it into compatible signal of atmega16 uart(LVTTL)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top