Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] multimeter Mastech MAS830L - wrong resistance measurement

Status
Not open for further replies.
S

saavedra29

Newbie level 5
Joined
Jan 10, 2013
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Greece
Activity points
1,371
Hello. I bought two months ago a multimeter **broken link removed**.
Today, when i tried to measure resistance i saw that the measurements are totally wrong and not logical. Also when i switch to the diode indicator it buzzes even if i don't touch the two terminals together. I checked the battery with another multimeter and shows 9V which is OK. Do you have any idea what happens?
Thanks
 

Well, it measures only voltage correctly now. So i'll let it on the selve and buy another one, probably more expensive this time. I opened it but couldn't figure any burnt resistor with my unexperienced eye.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top