Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

rtpe of Hall Effect sensors used from RS online

Status
Not open for further replies.
M

MSyafiq

Newbie level 1
Joined
Nov 18, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
hello
currently I am doing a research on a permanent magnet motor
so actually I want to duplicate the hall signal
I used the RS 640-7488 hall effect sensors,
but the output signal is invert the original signal created from internal hall sensors from the motor
so, what are the type of hall effect sensor from RS that should I used
https://obrazki.elektroda.pl/2293906300_1357095142.jpg
 

You might use a magnet and an absolute single-chip encoder, like the iC-MH8, to get commutation signals directly out and compare them with the Hall-signale coming from the motor. Here you find the applications: https://www.ichaus.biz/wp_boost_performance .

Enjoy your design work!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top