Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Frequency behavior problem

Status
Not open for further replies.

-CAM-

Newbie level 5
Joined
Sep 25, 2009
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,353
Hi,
i'm working on this simple circuit to understend better poles and zeros.

**broken link removed**



I wasn't interested in the bias point so T1 is in triode region and T2 in saturation region.
V4 has AC magnitude of 1 V, so i plotted Bode diagram of the output.

**broken link removed**

It seems there is a RHP zero @ 440 Mhz and a pole @ 2.75 Ghz but I don't understand why using formulas with Cadence calculated parameters, i have different results.
Capacitance values are:

T1
Cbd -173.9f
Cdb -71.81f
Cdg -474.9f
Cds 150f
Csg -494f
Csd 144.9f
Cgd -367.7f
Cgs -629.5f

T2
Cbd -9.981a
Cdb -22.87f
Cdg -143.1f
Cds 137.4f
Csg -204.7f
Csd 4a
Cgd -28.49f
Cgs -410.8f

I used the following formulas:

z = gm1/Cgd1
p=-(gds1+gds2)/(Cds1+Cdb1+Cds2+Cdb2+Cdg2)

Can someone help me?
Thanks
 

Hi CAM,

It seems there is a problem with the attachments. The following message is obtained:
Invalid Attachment specified. If you followed a valid link, please notify the administrator
Can you fix the problem?

Z
 

schem.JPG
Bode.JPG

Is it now ok?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top