Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what is weight relating here in group_path synth command ?

Status
Not open for further replies.
hariharan.gb

hariharan.gb

Junior Member level 1
Joined
Feb 2, 2012
Messages
17
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,283
Location
Bangalore, India, India
Activity points
1,430
Hi

In the synthesis command below:

DC Shell >> group_path -name <> -from <> -to <> -weight 2

what is this weight 2 represents in group path? can anyone explain exactly, what it does to our synthesis process ?

Thanks
Hariharan B
 

When DC do optimization, it will give more effort(such as run time) to path group with bigger weight.
By default, all the path are given the same default weight value.
 

Thanks Yang,

Can you please comment on the below as well.
If I am starting my synthesis, and say for example I have a critical path group violating with 3ns.
I have given set_path_group -name xxx -weight < 4 >

Correct me, if my understanding is wrong.
This means worst 4 path down from WNS will be given more importance and tool will try to fix these 4 paths as much as it can ( taking more time of tool).
If my understanding is correct - weight value varies from 0 -100, so 100 is the max path that is given to tool., we cant give more than that? correct ?

Thanks
Hariharan B
 

The weight number "4" just set the optimization priority of the pathes. When issue the path_group command you need tell DC which pathes will give the weight (in you case is 4) value. You can use -from/-to option of this command to identify the pathes, on which you want to apply the weight value. Please "man group_path" in DC.
That is: "4" just represent the priority of the path group. In that path group you can have 1 timing path or 100000 timing pathes.
By the way, command is "group_path", not "set_path_group".
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top