Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ade7758 power meter problem

Status
Not open for further replies.

gehan_s

Member level 3
Joined
Aug 31, 2012
Messages
62
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Location
Sri Lanka
Activity points
1,799
Hi all,

I am making a power meter using ade7758. Is it possible to use this IC to measure a single phase also ? If so do I need to do any modifications to the circuit ?

If anyone has done a power meter using any ade77XX or ade7XXX IC (single phase or 3 phase), can you please give me any reports or schematics that you have made.

Thanks in advance !!!!!!!!!!!!!!!!!
 

If you really want to measure single phase using one set of input ADE7758 so it goes.
If you want to use all three (two) sets of inputs for measuring the three appliances in one phase so it is unfortunately not
 

thank you very much.

are you saying that i can measure single phase power (eg- a house where it only gets single phase power) AND three phase power (eg- industry environment where it gets 3 phase) using the same circuit ???

do i need to write to any registers in the chip for this ????

thanks !!!!!!!!!
 

ADE7758 is Poly Phase Multifunction Energy MeteringIC with Per Phase Information,
As such it can measure consumption of the three phases and it has a set of registers for each phase can be involved by connecting only one phase and it's use. Truth but I see no reason why to do it
Analog Device do many single phase IC , for example ADE7753
They are cheaper, they will have less power, are smaller and thus you will have less work.

https://www.analog.com/en/analog-to-digital-converters/energy-measurement/products/index.html
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top